Link:INB Home|INB English| INB русский язык|INB العربية|INB Türkiye|INB فارسی|INB Español|INB Français|INB Português|INB Deutsch|INB 國語|INB 中文|INB 日本语|INB 한국어|INB ภาษาไทย|INB tiếng Việt||Tutorials LightWave 3D Modeling Basics: 3D Banners
INB Português Fórum
BEM - vindo a indústria nativa e "boffin") Da era industrial, aqui está cheio de espírito de Luta, Ambos através Da rede espaço biológico nativo espírito "boffin" VEIO a mad labs.Casa, Nome Definitivo:
INB Português Fórum

BEM - vindo a indústria nativa e boffin) Da era industrial, aqui está cheio de espírito de Luta, Ambos através Da rede espaço biológico nativo espírito boffin VEIO a mad labs.Casa, Nome Definitivo:

Você não está conectado. Conecte-se ou registre-se

《《《《《《《上一页INBforum   Ir em baixo

上一页INBforum》》》》》》》Ver o tópico anterior Ver o tópico seguinte Ir em baixo  Mensagem [Página 1 de 1]

1 Tutorials LightWave 3D Modeling Basics: 3D Banners em Qua Jan 26, 2011 4:26 am


by Gildardo Triana Jr, NewTek Technical Support

Creating 3D banners in LightWave 3D® is so
easy it will make you fall out of your computer
chair. All right let's get started!!!

1 - Launch
the Modeler and set your SELECTION MODE to POLYGONS (ctrl+h).

2 - Under the CREATE tab
click on the SKETCH tool. (')

3 - From the TopView draw
the length and fold of your banner. Then deselect
the Sketch tool.

4 - Click anywhere
on the curve to select it and click COPY (c) then PASTE (v)

5 - Leaving
the curve selected pick up the MOVE tool
(t) located under the MODIFY tab. Using
the BACK VIEW move the curve down on the
Y-axis. The gap between the curves defines the
height of the banner.

Note: You
can constrain your movement by holding down
the CTRL key before you click and move
with the mouse.

6 - Now change
your SELECTION MODE to POINTS (ctrl+g)
and drop any tools you currently have selected.
From the TOP VIEW select the first point
on the left. If everything is still lined-up
then the first points on both curves should now
be selected.

7 - COPY (c) these
points and go to the next open layer (top right
of screen) and PASTE (v)

8 - Turn this
into a 2-point polygon by selecting the points
and clicking on MAKE POL (p) located
under the CREATE tab.

9 - Leave this
new layer as the active layer and select your
previous layer with the curves as the background
layer (click the lower half of the layer to show
in background).

10 - Under
the MULITPLY tab you will find
the RAIL EXTRUDE tool. Click
on it and go with the defaults. This should create
your banner.

Tools such as Rail Extrude are
dependent on having a foreground element
to work with and a background element to use
as reference. The set-up is simple once you have
been through it. And like all tools in LightWave® Rail
Extrude can be used to make many other things.

Alternatively we could have
created this banner without the Rail Extrude
tool. If you stop at step 3 you can use the Extrude
tool to create the banner. Keep in mind that
there is almost always another way of doing something.
Some ways will be faster, some will be more flexible. Tools
have labels to define what they can be used for
but remember to think of them as just that -
TOOLS. Once you have gotten the hang of what
they do, try to think of what YOU can do with
Source File Here

Ver perfil do usuário

上一页INBforum   Ir em baixo

上一页INBforumVer o tópico anterior Ver o tópico seguinte Voltar ao Topo  Mensagem [Página 1 de 1]

Permissão deste fórum:
Você não pode responder aos tópicos neste fórum

Copyright ©2009-2010 LTD Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.



Um fórum grátis | © PunBB | Fórum grátis de ajuda | Fale conosco | Assinalar uma queixa | Fórum grátis